Bunch of axles & Ram parts!!

[swirvin21]

Bunch of 1 ton axles
Trying to clean out the shop. Shannon came by and looked at the D80 3.54 rear end, was going to do the swap but brakes were slightly different. I'm always open for trades, especially but make offers on anything

AXLES:
FRONTS:

-Dana 60 HP SRW, 4.10 gears, open (not sure), this is just the housing no knuckles out. Out of a 95 Ford F350, Ball joint axle. Setup for leafs: $400

-Dana 60 HP DRW, 4.88 gears, open, disc brakes, complete axle. This has extra large 3.5" tubes from a 2004 Ford F450, Ball joint axle. Setup for leafs. Pattern is 8 on 225mm, but it is adapters on the Ford 8 on 170mm pattern: $800

I will be pulling the 3.54 Dana 60 out of my '98 Ram once I find a 4.10 unit to swap in. It will be for sale as well, complete: $600


REARS
Both out of 98-99 Dodge Ram 2500 V10 trucks (both 8 on 6.5" pattern)
-Dana 80 SRW rear, 3.54 gears SOLD
-Dana 70 SRW rear, 3.54 gears, open diff (think), drum brakes, complete in driving truck $500
-Dana 80 DRW rear, 3.54 gear (bad), open carrier, disc brakes. Gears were chipped and damaged, needs rebuild, but all parts are included (drum in hat parking brake w/ disc): $500

Out of 2004 Ford F-450 DRW
-Dana S135 DRW rear SOLD

RAM STUFF:
-NP241DLD transfer case, 23 spline input SOLD
-rear sway bar from a D80 rear: $50
-5.9L V8 360 throttle body complete w/ sensors: $50
-spare 3/4 ton 4x4 steering box: $50
-V10 front coil springs, stock height(2-3" lift for 1500s): SOLD
-pair of spare shock towers: $30
-rear 2 piece driveshaft from long bed quad cab 2000 auto 4x4 V10 truck: $100
-would consider selling a complete V10/47RE conversion w/ motor, trans, wiring harness and computer for $1500
-passenger side airbag from 2000 ram (no cover): $50
-3/4 ton rear lift block 5": $30

I probably have a few other things sitting around, but no interior parts other than listed. I know a good Dodge junkyard nearby, good guy for an owner, so might be able to help some.

Also have a NP208 from a Chevy Blazer for $50

Also have some Ford F450 parts from a chassis I picked up, see photos

Kyle
(918)729-2239

Everything is around Tulsa: Kiefer or Haskell.

F450 stuff

[swirvin21]

D80 DRW disc, bad gears



D60 Ford HP 4.10: knuckles will be removed, still on right now


Dana 60 front SRW 3.54: still in truck right now, looking for a 4.10 replacement


D70 rear is in this truck still 3.54 SRW, good shape, new pinion seal:


Leafs and such, also have some overloads

[swirvin21]

Exhaust from the Ford F450 is going to the scrap yard soon. SCRAPPED

4" mandrel bend single out w/ diesel catalytic converter and muffler. $100 is you come get it. Good pieces to make your own kit or stack...

[swirvin21]

If anyone is interested in anything please let me know and we'll try to work out a deal. Need money to fund my back procedure at the end of this month!!

[swirvin21]

Also found a spare Auto Pedal Assembly from a 2000 Ram, a pair of KORE 3rd gen 2" lift Progressive rate front springs, a V8 5.9L airbox, a V10 airbox, a pair of Headers for a 5.9L V8. I will have another 3/4 ton steering box and shaft after I swap in my new Borgeson units.

Please make some offers! I need to get some cash together for a back procedure just after Memorial Day. Thanks!

[swirvin21]

this weekend only

-SOLD 3.54 Dana 80 rear axle.....
-$400 for 6 19.5" steel rims w/ tires that have a 8 on 225mm pattern off F450, including front Dana 60 DRW adapters w/ 8 on 170mm to 8 on 225mm

Updated list above, make offers. I'm needing cash for next weeks back procedure!

[swirvin21]

Sold the D80 3.54 SRW and a NP241 tonight!

[swirvin21]

still have the 19.5" dually rims/tires from the F450: 4 tires are good, 2 questionable. 8 on 225mm pattern. $300 for all 6
SOLD!!!

[swirvin21]

any interest? Would consider trades, but cash talks!!

[swirvin21]

SOLD the 19.5" tires!!