10-26-2011, 06:36 PM
|
#1
|
Hemi Gangsta!!!!
Join Date: Aug 2011
Location: Moore, OK
Age: 39
Posts: 786
|
Clutch fan is off!!
Now that the temps are down from SCORCHING here in Oklahoma, I pulled my mechanical clutch fan off my truck. It took a whopping 15 minutes to do and I only needed a small screwdriver and a BIG crescent wrench. I used the screwdriver to pop the clips out of the lower fan shroud, then to hold the water pump pulley still while i cranked CLOCKWISE on the fan. It wasn't even tight, came off super easy. Dropped the fan out the bottom....I did this solo....and then propped it up against the tire while putting the covers back on. No issues with temps in traffic or sitting, but it is 60 degrees here today.
Definately feels more spirited on the onramps...track night tomorrow to see if I can best myself!!!
__________________
BellTech 963SP / InTune / Volant / Fastman / Magnaflow / Moroso AOS / 180 T-Stat / Mech Fan Delete & V-6 E-Fan / Amsoil
14.574 @ 97.82 3.21 gears, full street trim, 5120 pounds on the scale!!!
|
|
|
10-26-2011, 07:09 PM
|
#2
|
Cummins Member
Join Date: Aug 2011
Location: Blanchard
Age: 29
Posts: 3,267
|
Nice!
__________________
|
|
|
10-26-2011, 08:48 PM
|
#3
|
Cummins Member
Join Date: Aug 2011
Location: Norman
Age: 39
Posts: 4,051
|
I did this back in June and never had an issue except when I was in Vegas and had to deal with high temps AND dry air. Very nice dude.
Did you do a 180 stat also?
|
|
|
10-26-2011, 09:19 PM
|
#4
|
Hemi Gangsta!!!!
Join Date: Aug 2011
Location: Moore, OK
Age: 39
Posts: 786
|
Yeah, I've had the 180 in since last fall....works great. Have the DSP fan settings at 186 low 196 high
My fan wasn't even hard to get off....no busted knuckles!
__________________
BellTech 963SP / InTune / Volant / Fastman / Magnaflow / Moroso AOS / 180 T-Stat / Mech Fan Delete & V-6 E-Fan / Amsoil
14.574 @ 97.82 3.21 gears, full street trim, 5120 pounds on the scale!!!
|
|
|
12-29-2011, 09:44 PM
|
#5
|
Newbie
Join Date: Dec 2011
Location: Cibolo, TX
Age: 55
Posts: 9
|
Originally Posted by 916Timmy
Yeah, I've had the 180 in since last fall....works great. Have the DSP fan settings at 186 low 196 high
My fan wasn't even hard to get off....no busted knuckles!
|
I did mine when my truck had about 4k miles, so I didn't have it too difficult. I am not familiar with the DSP fan; I anticipate it's strong enough fan to handle the heat? I have a Zirgo 2700 and it doesn't cut the mustard when it's 105* outside and I run the a/c. I do like NOT hearing the fan when I crank the truck up...
__________________
4.7L Flex-fuel Inferno Red Quadcab, w/dogamatic trans. Couple of mods...
|
|
|
10-26-2011, 10:27 PM
|
#6
|
Cummins Member
Join Date: Aug 2011
Location: Norman
Age: 39
Posts: 4,051
|
Me either...my 04 was HORRIBLE.
|
|
|
12-31-2011, 01:09 AM
|
#7
|
SRT-10 Member
Join Date: Aug 2011
Location: Collinsville
Posts: 1,624
|
Originally Posted by BMRbrnSNRbrd
Me either...my 04 was HORRIBLE.
|
dont say that
__________________
04 LowHemi
|
|
|
12-31-2011, 02:23 PM
|
#8
|
V6 Member
Join Date: Nov 2011
Age: 38
Posts: 111
|
Originally Posted by OklaHemi
dont say that
|
My 03 was a B@#$!, if that is any better...
__________________
_______________________
2010 Brilliant Black QC Sport
Superchips
Belltech 2/4 drop
Kicker 6x9's and tweets
Kicker amp, foxbox , Infinity reference 12
For sale: All From my '03, traction bars(flame red powdercoat), new in box full set of int. & exh. valves for a 5.7, new in box 6.1 oil pump, roll pan(flame red), WideBand Commander with gauge pod(steering wheel). I also have the complete Miller Specialty tool set for Hemi's. Just make a damn offer...
|
|
|
12-30-2011, 05:53 PM
|
#9
|
V6 Member
Join Date: Nov 2011
Age: 38
Posts: 111
|
DSP, is his tuner, Diablo Sport Predator. It has adjustable fan settings for the efan on the AC, which allows you to remove the engine driven clutch fan.
__________________
_______________________
2010 Brilliant Black QC Sport
Superchips
Belltech 2/4 drop
Kicker 6x9's and tweets
Kicker amp, foxbox , Infinity reference 12
For sale: All From my '03, traction bars(flame red powdercoat), new in box full set of int. & exh. valves for a 5.7, new in box 6.1 oil pump, roll pan(flame red), WideBand Commander with gauge pod(steering wheel). I also have the complete Miller Specialty tool set for Hemi's. Just make a damn offer...
|
|
|
12-30-2011, 08:10 PM
|
#10
|
Hemi Gangsta!!!!
Join Date: Aug 2011
Location: Moore, OK
Age: 39
Posts: 786
|
^^^ Yep....I'm also going to swap the stock A/C fan for the bigger true e-fan from the new v-6 trucks!
__________________
BellTech 963SP / InTune / Volant / Fastman / Magnaflow / Moroso AOS / 180 T-Stat / Mech Fan Delete & V-6 E-Fan / Amsoil
14.574 @ 97.82 3.21 gears, full street trim, 5120 pounds on the scale!!!
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|