system help..
 

alright this is in my tahoe but I thought id see what yall thought i built a wall with two 18" MA subs there dual 4 and ive got a pyramid 3000 watt amp pushing them.

the amp keeps kicking off and going into protect mode if turned up very loud. my first though was maybe it under powered so i thru a second battery under the hood and still the same thing i dont think the second batt helped at all...

anyone else have any thoughts? id like to solve this system issue so i can move on th my dodge system set up

First thing I would do is check all the fuses associated w/ the amp. My inline fuse melted and wasn't getting a good connection and used to do that.

the fuse thats in the amp its self or fuse thats on the 0 gauge between amp and battery?

Both. Mine was on my power wire between the battery and amp. But occasionally when a fuse blows it can melt the leads inside the fuse and once in a blue moon those melted leads fuse back together but don't carry enough current.

alright be cause on my 0 gauge ive got a kicker fuse block holds a 300amp fues then im not sure about whats in the amp its self..

im wondering now if maybe i could have possibly wired the amp down to a lower ohm then it can handle... its 2ohm stable amp.. ill post a diagram how ive wired it maybe that could be my problem idk how all the ohm and taking ohms down work...

Yeah, me either. I'm really good with installation and stuff like that but I refer to others on all the technical stuff.

Heres how its wired except its bridged at the amp..

Each sub running at 4ohms on a 2 ohm amp? Wish I knew how to help but that's a little over my head, sorry man

Thanks anyways bud. I figured matt on here would know hes got knowledge on this i believe im thinking that with my amp bridge and subs haveing wires ran this way im probably trying to get a lower than 2ohm and its not made for that so im thinking i need to do this in stead...
http://i1091.photobucket.com/albums/...e/7f04717f.jpg