Billet Technology Oil Catch Can updates
I'm going to make this a constantly updated thread for the next six months to a year, depending on interest.
There are a lot of non-believers when it comes to oil catch cans and their effectiveness and use...I have no stake in anything regarding BT, but I'm aiming to disprove the rumors that it does nothing. Today is DAY 1: Starting mileage: 15280 http://i269.photobucket.com/albums/j...8-06204036.jpg Number of miles on this clean out: 3228 http://i269.photobucket.com/albums/j...8-06203025.jpg Empty 16oz water bottle: http://i269.photobucket.com/albums/j...8-06202827.jpg Can: http://i269.photobucket.com/albums/j...8-06202816.jpg Oil in the bottle: http://i269.photobucket.com/albums/j...8-06202948.jpg Stay tuned for updates! |
I'll be watching this one
|
Pardon my ignorance...
But I've seen this mod over on GPMM and also have heard whispered discussions about Hemi engines breathing thier own oil (thus the need for a catch can). I'd love some schooling on this mod if you wouldn't mind. Especially why Mopar designed the PCV system like this in the first place. It looks like a lot of oil...like my old van with 300k miles pumping it through the breather hose. My van had an excuse. |
yuck you are making me want to get one
|
Dodge did this for emissions and emissions only. WAYYY back in the day (like before any of us were around) there used to be little tubes that would just let this condensed oil drip onto the ground as needed, but that's not something anyone can do anymore.
What this setup does is put a two chamber can in line between the PCV valve and the throttle body. The top chamber, where both hoses connect, has a filament inside similar to steel wool. The steel wool allows the vapors to condense and then drop down into the second chamber (that you see me holding) for collection. I figured this was a joke until seeing pics of an LX Hemi opened up for a cam/head swap and all the oil everywhere it shouldn't be. I ordered one, installed it, and instantly picked up a hand calculated .5 mpg increase and the comfort of knowing that my truck is no longer breathing it's own oil. |
Quote:
Normally....proper valve cover baffling keeps you from sucking in large amounts of oil through unless your crankcase pressure is high. That used to occur from worn rings, and when the system got overun, it pumped it elsewhere...usually out a gasket. I haven't studied a new Hemi closely, but one thing I noticed is that the valve covers are almost non existent. Since there's little room for baffling I'd bet your pcv vacum does indeed pick up more "oil fog" from inside the valve cover than it should. I'd say the engineers goofed... digesting oil causes pinging and unless internal materials have changed it will plug your catalytic converter quicker. I'm suprised JC Whitney or someone else didn't think of this sooner for high mileage cars. |
Thanks for that info bud.
|
That doesn't seem like a lot of oil to me. When the plenum gasket in my truck was blown I could go through a quart of oil in 3000 miles no sweat. THAT was an oily mess!
|
That was the same with me
|
Quote:
|
All times are GMT -4. The time now is 12:23 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.