Oklahoma Ram Club

Oklahoma Ram Club (http://www.oklarams.com/index.php)
-   Performance (http://www.oklarams.com/forumdisplay.php?f=22)
-   -   Suggestions? (http://www.oklarams.com/showthread.php?t=681)

WhiteLightning 02-24-2012 11:03 AM

Suggestions?
 
Im looking into getting a shift kit and torque converter to try and preserve my stock transmission. Does anyone have any suggestions of some good ones and if possible wallet friendly ones? I found one from from TCI for 1300 that guarentees a stock tranny to 600hp but im not very familiar with them. Any advice would be appreciated. Thanks

nightmatt 02-24-2012 01:29 PM

never heard of them but I haven't done much research on diesel stuff. mostly all the guys I know just step up and go with a name brand they know works ATS. trans

Graygoose 02-24-2012 03:05 PM

stay away from TCI....I'm new here, tell me more about your truck, year, etc?

WhiteLightning 02-24-2012 03:55 PM

Quote:

Originally Posted by Graygoose (Post 11314)
stay away from TCI....I'm new here, tell me more about your truck, year, etc?

Thanks for that tip. It's a 2000 reg cab dually 5.9l 24 valve cummins. Bone stock for now, but I have alot of plans for it and I'd like to beef up the tranny a little before I start pouring power to it.

WhiteLightning 02-24-2012 03:58 PM

Quote:

Originally Posted by nightmatt (Post 11313)
never heard of them but I haven't done much research on diesel stuff. mostly all the guys I know just step up and go with a name brand they know works ATS. trans

Yeah but when I'm working for everything I have every penny saved is a penny earned if it's going to be of equal quality. I'm not going to pay an extra 250 just to get the sticker.

Graygoose 02-24-2012 06:54 PM

Quote:

Originally Posted by WhiteLightning (Post 11318)
Thanks for that tip. It's a 2000 reg cab dually 5.9l 24 valve cummins. Bone stock for now, but I have alot of plans for it and I'd like to beef up the tranny a little before I start pouring power to it.

the diesel converters are very expensive, and kinda would be counter productive in a diesel. A converter lets the transmission 'slip' to a higher RPM to get into tourque curve faster, like a larger cam would do. Like an after market cam raises power range from 1400-5000 to say 2000-6000.
A diesel motor makes low end grunt. So you would slip past the torque curve.
Best mods are simply a good muffler and exhaust. ( I have a 4"Flowmaster muffler that would work for you brand new for sale, or trade but see my PM too :) ) that would help, along with a tuner.
Those two mods alone are worth a ton in power.

ramthis9501 02-24-2012 07:34 PM

^ What he said

Lt.Dan 02-25-2012 01:43 AM

Mine has a locking torque converter but am unsure of the brand of it. I flipped it but theyre mostly for hauling and what not if you're going fast with a big load.

WhiteLightning 02-25-2012 03:35 AM

Quote:

Originally Posted by Lt.Dan (Post 11348)
Mine has a locking torque converter but am unsure of the brand of it. I flipped it but theyre mostly for hauling and what not if you're going fast with a big load.


im doing programmer and exhaust for sure right now, just dont want to go any further before i beef up my transmission, because eventually i wanna do injectors, lift pump, injection pump, HX40, and stacked tuners. possibly twins if i hit the lottery haha. i have a buddy with a truck thats been sitting for 4 weeks because he put too much power to his stock transmission and is now looking at 5k dollar bill to build a suncoast to hold up. just looking for a little insurance with out going ahead and sinking HUGE money into it. thanks for the tips tho guys

ramthis9501 02-25-2012 01:48 PM

Also get a cold air intake because with that big exhaust, you'll be pushing more out, so you want to bring more in to. Air that is lol that'll be perfection without going to crazy


All times are GMT -4. The time now is 01:53 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.