Oklahoma Ram Club

Oklahoma Ram Club (http://www.oklarams.com/index.php)
-   Audio/Visual (http://www.oklarams.com/forumdisplay.php?f=24)
-   -   Wiring diagram (http://www.oklarams.com/showthread.php?t=516)

ramthis9501 12-20-2011 09:15 PM

Wiring diagram
 
Does anyone know where I can find a wiring diagram for a JVC KD-APD89 headunit? Wanting to know what wires are what on the harness.

LowRam 12-20-2011 09:58 PM

Im not going to garentee this but im 99% sure this is right. all JCVs ive owned were lil this.

Memory (+12v Constant) Yellow
Ignition (+12v Switched) Red
Ground (-) Black
Power Antenna Blue
Amplifier Turn-on Blue/White

Right Front (+) Gray
Right Front (-) Gray/Black
Left Front (+) White
Left Front (-) White/Black
Right Rear (+) Violet
Right Rear (-) Violet/Black
Left Rear (+) Green
Left Rear (-) Green/Black

Matt 12-20-2011 10:10 PM

Quote:

Originally Posted by LowRam (Post 7728)
Im not going to garentee this but im 99% sure this is right. all JCVs ive owned were lil this.

Memory (+12v Constant) Yellow
Ignition (+12v Switched) Red
Ground (-) Black
Power Antenna Blue
Amplifier Turn-on Blue/White

Right Front (+) Gray
Right Front (-) Gray/Black
Left Front (+) White
Left Front (-) White/Black
Right Rear (+) Violet
Right Rear (-) Violet/Black
Left Rear (+) Green
Left Rear (-) Green/Black

EVERY aftermarket headunit is like this

LowRam 12-20-2011 10:47 PM

O ok lol. I think pioneer are just a little different tho

Matt 12-20-2011 10:56 PM

Quote:

Originally Posted by LowRam (Post 7731)
O ok lol. I think pioneer are just a little different tho


Quote:

Originally Posted by Matt (Post 7729)
EVERY aftermarket headunit is like this

:)...

ramthis9501 12-20-2011 11:24 PM

Sweet thanks man!

ramthis9501 12-20-2011 11:26 PM

One more question, I can run two amps off the same amp turn on wire right?

Matt 12-20-2011 11:26 PM

yes just run a jumper wire from 1 amp to the other

ramthis9501 12-20-2011 11:29 PM

Like connect it amp to amp or just the wires on the back of the headunit?

Matt 12-20-2011 11:54 PM

run a remote wire from the head unit to 1 of the amps and then where you connect it to the amp run a jumper from there to the other amp if they are both close or you can run two off the headunit either way it works just easier the other way ... guessing you're running a 4 channel for your mids/highs?


All times are GMT -4. The time now is 09:49 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.